Hi,
I'm trying to refurbish a very old Ham-M rotor. The previous owner
managed to remove one of the 4 bolts holding the housing halves together
and torqued the heads off two others. I managed to torque the head off
the remaining bolt. It seems like the two halves of the housing should
come apart now but I've been bathing it with WD-40 for a couple weeks
and banging on the housing with a hammer, but can't get the two halves
to separate. They must be really corroded together.
I've also managed to break a couple of screw extractors trying the get
the headless bolts out.
Any suggestions?
Thanks,
Dick
K7RB
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|