Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn guying for 40 ft tower

To: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] Rohn guying for 40 ft tower
From: Cqtestk4xs@aol.com
Date: Mon, 11 Apr 2005 08:19:55 EDT
List-post: <mailto:towertalk@contesting.com>
In a message dated 4/11/05 11:15:14 AM Greenwich Standard Time, 
w9rpe@comcast.net writes:
My question:  Do I really need to guy 40 feet of 25g with this lightweight 
antenna?  I would estimate the antenna, mast, rotor and hazer to weigh no more 
than 60 lbs. combined.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The weight is not an issue, the wind load is.  You did not mention if there 
is any support for the tower below, such as a house bracket.  I assume there is 
not since you are using a hazer.

The answer, and anyone on the reflector who knows towers is going to give 
you, is you should not do it without guy wires.  Rohn 25 is not meant to be 
self-supporting at that height.  As a matter of fact, it is not meant to be 
self-supporting at the height you have it at now, according to the Rohn book.

Bill K4XS
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>