The type of amp has nothing to do with it. Just calculate the max peak
voltage for 1500w in 50ohm coax with whatever the highest swr you expect to
handle would be.... then add a safety factor.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Keith Dutson
> Sent: Thursday, March 31, 2005 21:19
> To: TowerTalk@contesting.com
> Subject: [TowerTalk] Relay Specs - Coax switch
>
> I am home brewing a coax switch for the shack. I want it to handle 1500
> watts of power, but not to "hot" switch. I am looking at PCB relays and
> found many that handle 10 amps, but only a few that specify a high
> dielectric voltage. What kind of voltage should be expected out of a
> legal-limit amplifier such as an Alpha or Ameritron? TIA
>
> Keith NM5G
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|