I have been reading with interest the exchanges about Telrex antennas. Back in
about 1991 I bought a brand new TB4EC from the Telrex factory for $375 + $90
shipping to Newfoundland. I was told it was the last one on the shelf. I
ordered it because I had been looking at Telrex ads for years and was wooed by
the supposed quality and ruggedness.........and I needed a small yagi due to
space considerations. I had been using a monoband homebrew 20M 2 el yagi and
this TB4EC was not much bigger and would give me two more bands.
The first winter ( I think 1993) that I had this yagi in the air at about
45ft....the reflector element for 20M ( which is linear loaded with a hairpin)
actually tore the end off the boom!. As you know the Telerex elements pass
through the boom. There is a 2.5inch sleeve for added support but the holes
for the insulators for the reflector element are so big that there is not
enough material left in the end of the two inch boom to withstand the
continuous movement of the reflector. I called the Telrex people to try and
get another boom but of course by then there was no answer to my calls and I
guess they were out of business.... I had to have a local machine shop make a
12 inch long end piece to fit over the end of the boom and with the necessary
holes to accommodate the insulators. That end peice was double bolted through
the end stubb of the boom and is still there today. The next winter the
antenna was subjected to several ice storms and one storm in particular was
very bad . The icing was built up to about one inch radially on the
elements...some how they did not break but when the ice fell off the elements ,
particularly the driven element and the 20M reflector did not return to their
orgionally shape . They were severely buckled and unsightly. I took the
antenna down in disgust and stored it for 10 years in my barn. For some reason
I couldn't bring myself to throw it out.
In the summer of 2003 I resurrected the Telrex and took it completely apart.
I replaced the sheet metal screws and straightened the elements . I then ran
short sleeves of tubing over the spots where the elements were straightened out
to give some added strength. I put a new balun on it and erected it on the
tower here at my new QTH....I added another U Bolt to give strength to the boom
to mast joint since the orgional Telrex design called for ONE U bolt through
the boom to hold the antenna to the tower. Last winter 2003/2004 I actually
was happy with it as it has some front to back , about 12-15db which is a ll
you can expect from 2 ele and a very noticeable pattern. This winter we have
had a lot of icing and high winds. The winds here will gust to 100kmph on a
routine basis so an antenna with ice on it is in real trouble. The last storm
was during NAQP RTTY weekend. There has been some damage to the elements in
that the driven ele and the 20M reflector have take
n on a definitive bend in a horizontal direction. also there is intermittent
high SWR on 15 and 20M probably caused by some problem with a screw at a 10M
trap. Also I have always wondered about the tubing joints near the traps .
There is not a tight fit there and always some play in the junctions. The
tubing sizes just don't match well .
Anyway I just wanted to add my experiences with Telrex here in Newfoundland.
Its just a very small antenna , only an 8ft boom and it weighs only 30lb so
you'd think that it would last. Generally the mechanical design is very poor
in my view. For instance the tips of the 20M reflector are 3/4 inch tubing
!!.....very heavy and you can see the sag in the elements.
73 Frank VO1HP
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|