In a message dated 2/21/2005 9:57:42 PM Pacific Standard Time,
towertalk-request@contesting.com writes:
From: EL34GUY@aol.com
Subject: [TowerTalk] looking for rohn J bolts and TB4 bearings
To: towertalk@contesting.com
Message-ID: <fa.d57380a.2f4beeb4@aol.com>
Content-Type: text/plain; charset="US-ASCII"
Hello,
At the risk of appearing too cheap,
Cheap? A cheap ham?!? Wadda concept.
does anyone have any of the J bolts for
the rohn ssv series they would like to sell? I need the 42 inch long 5/8 inch
ones and I need all 12.
You don't need anything special. You can use allthread from your local
hardware store - it's the same material. Just double nut a couple of big
washers
at the bottom and you'll be in business. US Towers welds nuts on their anchor
rods but this'll do the same thing.
Cheers,
Steve K7LXC
TOWER TECH -
Professional tower services for commercial and amateur
Cell: 206-890-4188
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|