Towertalk
[Top] [All Lists]

Re: [TowerTalk] liberating aluminum

Subject: Re: [TowerTalk] liberating aluminum
From: Gary Schafer <garyschafer@comcast.net>
Reply-to: garyschafer@comcast.net
Date: Thu, 17 Feb 2005 14:36:04 -0500
List-post: <mailto:towertalk@contesting.com>
I don't know if anyone has mentioned: If you can't get them apart any 
other way you could try a dremle tool with a cutting disk. Cut a slot on 
the outer tube several inches as needed. That should free it up.
Use a hose clamp when reassembling.

73
Gary  K4FMX



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>