Towertalk
[Top] [All Lists]

RE: [TowerTalk] Re: Rotor Mounting Hardware

To: <towertalk@contesting.com>
Subject: RE: [TowerTalk] Re: Rotor Mounting Hardware
From: "Keith Dutson" <kjdutson@earthlink.net>
Reply-to: keith@dutson.net
Date: Tue, 1 Feb 2005 15:13:15 -0600
List-post: <mailto:towertalk@contesting.com>
Good point.  Use OEM hardware and you should be good to go.

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of KJ6Y@aol.com
Sent: Tuesday, February 01, 2005 2:36 PM
To: aa4lr@arrl.net; keith@dutson.net
Cc: towertalk@contesting.com; wlfuqu00@uky.edu
Subject: Re: [TowerTalk] Re: TowerTalk Digest, Vol 26, Issue 4

Hygain supplys stainless steel hardware, nuts, bolts, washers, u-bolts with
all their new rotors and replacement hardware kits. They've been doing this
for some time now, long befoe MFJ bought them.

Skip, KJ6Y
Communications Service Co
818-887-3569
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>