My catalog is the Rohn Ham Tower Catalog and there is no page 25G-1 (or 2).
The specs for 25G in this catalog do not even list any loading info without
either guys or a house bracket.
Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Blake Bowers
Sent: Saturday, January 29, 2005 4:21 PM
To: Hank Lonberg; TowerTalk@contesting.com
Subject: Re: [TowerTalk] Rohn 25
Page 25G-1, and page 25G-2 of the Rohn consumer catalog.
Their design charts, their design drawings.
> Blake:
> I beg to differ with you.
>
> Using TIA/EIA 222-F wind loading criteria and 70 mph wind velocity (min.
> recommended) a 40 foot section of Rohn, 25g un-guyed and cantilevered
> will develop a moment at the base of 7200 ft-lbs at the base. This is
> without an antenna load, just the tower itself. The published
> allowable moment for 25g ,by Rohn, with a 1/3 increase for wind
> loading duration is 6,720 ft-lbs.
> At
> 40 feet it is clearly overstressed. How do you say that this is ok and
> that Rohn fully supports this?
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|