Frank Donovan wrote:
Doc,
For comparitive purposes, Dillsburg Aeroplane Works in Dillsburg, PA
sells 2" od x 0.188" wall 4130 Cr-Mo tubing for $9.00 per foot.
This is raw Cr-Mo steel, not galvanized.
If you do not galvanize the mast it will slowly rust; however, its unlikely
to lose any significant strength in your lifetime or mine. You can paint
the mast to delay the rust process. Beware: a painted or galvanized
2" od mast will not fit into a 2" thrust bearing!
Could I not just spray it with some Krylon? Except at the rare point of
contact most of the mast is in the clear -- the goal is to just prevent
oxidation and anything that seals the surface of the ChromeMoly should
accomplish that, yes?
We are located in West Central Florida about 10 miles in from
the coast, so no salt issues.
--
Thanks! & 73, doc kd4e
A blessed and joy-filled New Year to all!
West Central Florida 100% Linux. Suse 9.2
Hallicrafters, Heathkit, Homebrew, TenTec, Yaesu
Radio Life: http://www.gospelcom.net/twr/
Linux-Incompatible hardware is defective!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|