And, if I may make my regularly scheduled transmission of safety
information concerning fall protection.
One poster mentioned that he only used a rope lanyard rather than a
shock absorbing lanyard, which is to be attached to the D Ring on the
back of your full body harness. When the average 300 lb. individual
falls, if the fall is abruptly stopped like when using a non shock
absorbing lanyard, the force exerted on the body and harness is about
5000 lbs. That's enough to tear you up. Using a shock absorbing
lanyard, the forces are mitigated down to about 500 lbs. When that is
applied to a properly fitting full body harness, those loads are
transferred to the strongest bones in the body, your hips.
The poster from below mentions the safety cable, which is a good idea
except it must also be designed properly. OSHA dictates that all fall
protection attachment points be capable of withstanding a 5000 lb.
load. 3/8 wire rope has a working load limit of less than 3000 lbs.
Also, the attachment up top must be very robust. Inquiring minds may
want to know. Be safe, Phil KB9CRY
While we are on the topic to tower safety, let me make my regularly scheduled
plug for a permanent safety system on your tower. This can be as simple as a
3/8" galvanized steel cable that is well anchored to the top of the tower and
runs down one face. You then use a trailing cable grab on your safety lanyard,
and you are always "clipped on".<
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|