Towertalk
[Top] [All Lists]

Re: [TowerTalk] Heathkit HD-1250

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Heathkit HD-1250
From: Doug Renwick <ve5ra@sasktel.net>
Reply-to: ve5ra@sasktel.net
Date: Wed, 29 Dec 2004 09:38:21 -0600
List-post: <mailto:towertalk@contesting.com>
I have used the HD-1250 to successfully dip A3S traps from two
different beams.  Yes, it needs tight coupling.

Doug

Bill Coleman wrote:

I've had very little luck trying to use my HD-1250 dipper. (Technically, it is a gate dipper, since it uses a FET) I did have some hygain traps from a AV-14 that dipped nicely, but my Cushcraft A3S traps would not dip at all.

I think the HD-1250 needs tighter coupling to get a good dip than some older tube-type dip meters.

-- Doug Renwick VA5DX PO Box 50, Clavet, Saskatchewan, Canada S0K 0Y0 VE5RA@sasktel.net First VE5 9BDXCC What profit it a ham if he gains all the awards yet forfeits his soul? I'll run the race and I will never be the same again.

_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>