-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
You could use synthetic rope, and the guy grips from buck.com
Look simple enough and easier to adjust than pulling and clamping
wire
Guys, I am putting up a 40 foot mast for my GAP Titan and will be
using
Probably 3/16 black Dacron rope and possibly guy grips unless I go
With rope to small to use with them. The 3/16 I have been looking
Is shown to have a 770 lb pull rating, should be more than enough for
A mast and vertical antenna.
73
- -----------------------------------
John
N5BSD
www.N5BSD.Com
Linux user #286770
Machine # 246511
http://counter.li.org
- ------------------------------------
- -----Original Message-----
From: towertalk-bounces@contesting.com On Behalf Of
kirk@kirkandjamie.com
Sent: Thursday, December 23, 2004 3:22 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Rohn 50' telescoping mast
Hello to the group. I have a Rohn 50' telescoping mast that I want
to put up in a semi-permanent location (for about a year). I am
wondering what the best way to guy this would be. What type of
anchors and wire should I use for this?
Thanks
Kirk
-----BEGIN PGP SIGNATURE-----
Version: PGP 8.1
iQA/AwUBQcw+kT4STIkCKSUlEQLlKgCgk8UJQadWNtFlYVVoOwDeYqkYxrkAn3zE
lOG+mI95exukuW02WrSS0bJC
=SFJY
-----END PGP SIGNATURE-----
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|