Re: [TowerTalk] Pull rope in PVC

["Tower" <tower@charter.net>]

I use a  1/8" nylon rope for a messenger cable.  If the job appears to need 
a larger one then I pull that in with the 1/8".

I've never had the 1/8" kink even in 1/2" PVC with two 90 degree sweeps.
Never pull through a 90 degree elbow.
If you have more than two sweep 90s, or they are well away from either end 
it wouldn't hurt to replace each 90 with a pair of 45s.

Use wire soap when making long pulls.  I've resorted to using dish soap 
(without ammonia) when I didn't have any wire soap.  It makes the difference 
between work and almost effortless.

Larger than necessary conduit also makes pulls easier, but don't forget the 
soap unless it's a straight run.

Roger Halstead (K8RI, EN73 & ARRL Life Member)
N833R, World's Oldest Debonair (S# CD-2)
www.rogerhalstead.com


> And to add, Roger:

> Secondly, expect the future pull-rope that you ran in the PVC  to snag or 
> twist up on something in your PVC at a >later date.
> Might pay to run a cable or larger  rope? (Something less apt to snag.) 
> Hind sight is always 20-20.

> Mike Bragassa, K5UO

> "Rule of thumb...

> Always use at least twice the size of conduit you think you need."

Roger Halstead (K8RI, EN73 & ARRL Life Member)

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any 
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk