In the Comtek hybrid, are the feedlines to the elements connected in
parallel at the hybrid, or in series? I'd guess parallel: notional 40-50
ohm feedpoint Z through 75 ohm 1/4 wave transformer gives about 100ohms, so
2 in parallel gives 50 ohms. However, one observation of the reality is
far better than an hour or two of dialectic.
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|