gdaught6@stanford.edu wrote:
Maybe not! I know of a welding shop (in my locality... central
California) that will do welding jobs pretty cheaply. I think they
have a minimum job cost of $30, and that's for 1/2 hour. An
experienced welder can do a LOT of welding in 1/2 hour!
A bit of shopping for welders in your area may be worthwhile.
73, George T. Daughters, K6GT
Will take your advice and ask around.
Will also have a close look at the condition of the tower
overall, and ask the welder to do the same, my guess is that
a competent welder can observe points of stress.
--
Thanks! & 73, doc kd4e
West Central Florida 100% Linux. Suse 9.2
Drake, Icom, Hallicrafters, Heathkit, TenTec, Yaesu
Radio Life: http://www.gospelcom.net/twr/
Linux-Incompatible hardware is defective!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|