----- Original Message -----
From: "David Hachadorian" <K6LL@adelphia.net>
To: "Towertalk Reflector" <towertalk@contesting.com>
Sent: Thursday, November 18, 2004 2:50 PM
Subject: Re: [TowerTalk] Tower Installation
>
> Do this calculation:
>
> (Extended tower height - nested tower height)/number
of
> tower sections
>
> This number is the additional distance between
> standoffs when the tower is cranked up. Just add it
to
> the distance between standoffs when the tower is
> cranked down, and you will have the total length
> required.
I screwed that up. There is one less loop than the
number of tower sections, so the formula should be:
(extended tower height - nested tower height)/(number
of tower sections minus one)
Dave Hachadorian, K6LL
Yuma, AZ
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|