To: | "Rick Stoneking" <w2rds@arrl.net>,"TowerTalk Reflector" <towertalk@contesting.com> |
---|---|
Subject: | Re: [TowerTalk] Polishing a plastic meter face to remove scratches? |
From: | "Floyd Sense" <fsense@copper.net> |
Date: | Fri, 12 Nov 2004 07:52:24 -0500 |
List-post: | <mailto:towertalk@contesting.com> |
Richard - you can buy polishing kits made for plastic - think the brand was
Novis or Novus. For several years I've used Mothers brand "Mag and Aluminum
Polish", available from Advance Auto Parts stores in our area. It's a white
paste that does an amazing job on meter faces and other shiny plastic parts.
You can also use it to restore the sheen to small metal parts, such as screw
heads. I find that a back and forth linear polishing motion works much
better than a circular motion and doesn't leave noticeable marks. I
strongly advise you to resist the urge to use any sort of power equipment
when doing this job. The surface may heat up too much and permanently
damage the plastic. K8AC ----- Original Message ----- From: "Rick Stoneking" <w2rds@arrl.net> To: "TowerTalk Reflector" <towertalk@contesting.com> Sent: Friday, November 12, 2004 7:42 AM Subject: [TowerTalk] Polishing a plastic meter face to remove scratches? Is there a way to remove scratches on a plastic meter face? I have an older _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [TowerTalk] Polishing a plastic meter face to remove scratches?, Rick Stoneking |
---|---|
Next by Date: | Re: [TowerTalk] Polishing a plastic meter face to remove scratches?, Randy |
Previous by Thread: | [TowerTalk] Polishing a plastic meter face to remove scratches?, Rick Stoneking |
Next by Thread: | Re: [TowerTalk] Polishing a plastic meter face to remove scratches?, Randy |
Indexes: | [Date] [Thread] [Top] [All Lists] |