[TowerTalk] Roof mounting 5BTV

["R. Kevin Stover" <rkstover@mchsi.com>]

Hello Towertalk.

I'm planning on roof mounting a 5BTV vertical in the next week.
I'll be mounting it on an Radio Shack 3 ft. tripod and plan on 4 radials 
per band.
The manual tells me that I should use 2 feed line chokes, one at the 
antenna and one at the radio. I'm planning on using a pair of Radio 
Works T-4 1:1 current "line isolators" instead of the chokes.

One section of the manual has me a little confused though. The 
instructions say to RF isolate the antenna from the mounting mast if the 
mast is an appreciable fraction of a 1/4 wavelength in frequency. The 
tripod and mast will be 5ft tall. I've also noticed that there is no 
ground connection on this antenna. Is this correct?

This setup will be a temporary lash up to get me through the winter when 
I hope to be able to get a new tower and beam installed at the new QTH. 
If the vertical works well it will become my backup on the higher bands.

Thanks for the input.

R. Kevin Stover, ACØH



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk