Some towers, expecially crank-ups, have a sleeve at the top of the tower
that will hold the mast vertical when the rotator is removed.
de Paul, W8AEF
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of James C. Hall, MD
Sent: Tuesday, October 26, 2004 5:55 PM
To: Cqtestk4xs@aol.com; TOWERTALK@contesting.com
Subject: RE: [TowerTalk] Re: Thrust Bearing Usage
Hello:
I've been monitoring this interesting thread. I haven't had the need to
replace a rotor (yet) and I only have one thrust bearing on the top (flat)
plate. The rotor is 4 feet down the tower with the rest of the 20 foot C-M
mast and two beams above. It seems to me that if you lift the mast out of
the rotor and clamp it above the bearing, it will very much want to sway and
tilt with the better part of the weight above the tower. It seems you would
have to do some sort of stabilization just above the rotor to have a
fighting chance - a sort of faux bearing. Am I reading this correctly or is
my physics off ?
73, Jamie
WB4YDL
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.782 / Virus Database: 528 - Release Date: 10/22/2004
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|