I have a TX-455 installed with the tiltover fixture. After raising into
position I have noticed that the tiltover fixture is tilting sideways about 2
inches.( I know that the fixture is supposed to tilt AWAY from the tower.) The
arms on both sides of the fixture are the same length so this doesn't account
for it. This tilt is noticable if you stand opposite the fixture and look
through the tower. I have e-mailed US tower with the question and have gotten
no response so far.
Is this a design feature so the leg will not land on the back pad flange? Or do
I need to 'persuade' it to be straight up and down? If you have or have owned
one of these your input will be appreciated.
Dan W8CAR
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|