> Where the two loops could fit should result in fairly
short
> feeders, say maybe 4 or 5m at the most - perfect for some
> bits & pieces of ladder line left over from
radial-chopping
> Granny at a previous QTH.
4 or 5 meters is a serious modification in impedance
compared to what you have at the antenna because you have
significant SWR on the feedline.
I suggest you model the system and include the line. Eznec 4
will do transmission lines, or you could use TLA from the
Antenna Handbooks to determine a "sweet length" for the
feedline. Remember tuners like higher resistance slightly
inductive loads and that low impedance high capacitive
reactance loads are the worse situation.
There is a tuner program in TLA, or you can go to W9CF's
website to use one.
73 Tom
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|