Bill:
The easiest way, if you bought it from a supplier is ask for a copy of the mill
certification for the component. Sometimes the tubing is stamped or stenciled
with the alloy demarcation on it.
If none of the above apply then you have to take the word of whomever you
purchased it from.
Regards
Lonberg Design Group, Ltd.
Hank Lonberg, P.E.,S.E. / KR7X
President
-------------- Original message --------------
> I recently purchased a used 21' chrome-moly mast to replace my 21'
> aluminum mast. I was wondering, when I go to pick up the mast, how do I
> tell if it really IS chrome-moly?
>
> Thanks
>
> Bill KA4GAV
>
> Bill Turini (425) 787-4477
> IT & Facilities Manager
> Cypress Semiconductor Lynnwood, WA 98037
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather
> Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
> and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|