My dilemma regarding cadwelds has to do with the fact that at my QTH there's
an impenetrable (and thick) sandstone layer 4-5 feet below the surface. I
have always had to drive rods at an angle in order to get all eight feet
buried. This seems to work well, and I would like to replace the compression
fittings with cadweld; but I'm stumped because it appears that the rod needs
to be plumb in order to keep the shot material in the mold. I suppose I
could REALLY bury the things, and use a rebar bender to turn the ends up so
they're vertical, but that's the only solution I have been able to come up
with.
Any other suggestions from the group?
Chuck, N4NM
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|