To: | "J.Hector Garcia M" <Hector@telecom1.net> |
---|---|
Subject: | Re: [TowerTalk] wires in quad driven element |
From: | Don Havlicek <n8de@thepoint.net> |
Reply-to: | n8de@thepoint.net |
Date: | Mon, 23 Aug 2004 17:09:42 -0500 |
List-post: | <mailto:towertalk@contesting.com> |
Hector, I suggest you look into 'delrin cable clamps'. These are usually high temperature tolerable, come in different colors [perhaps different UV resistance?], different sizes [to fit around different size cables/tubing], and are VERY inexpensive. Each cable clamp wraps around [probably need to slide down] the spreader, and is tightened by putting a bolt/washer/nut to fasten. Seems to me that you could put a small spacer between the two 'lips' of the cable clamp, around which you could put the element wire. Might even be stronger if you twisted the element wire around the spacer and then soldered it[?] Good luck Don N8DE J.Hector Garcia M wrote: TT's: _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [TowerTalk] wires in quad driven element, J.Hector Garcia M |
---|---|
Next by Date: | Re: [TowerTalk] EZ-way RBS-40 wind speed and load, Julio Peralta |
Previous by Thread: | [TowerTalk] wires in quad driven element, J.Hector Garcia M |
Next by Thread: | Re: [TowerTalk] wires in quad driven element, John Tait |
Indexes: | [Date] [Thread] [Top] [All Lists] |