Towertalk
[Top] [All Lists]

Re: [BULK] - [TowerTalk] Penetrox

To: "Steve Katz" <stevek@jmr.com>, "'R March'" <n7ua@ix.netcom.com>,<towertalk@contesting.com>
Subject: Re: [BULK] - [TowerTalk] Penetrox
From: "Gene Smar" <ersmar@comcast.net>
Date: Mon, 2 Aug 2004 13:26:45 -0400
List-post: <mailto:towertalk@contesting.com>
Bob:

     There have been numerous postings on this subject previously.  You can
check through the archives.

     Two points that I like to emphasize (which I learned on TowerTalk) are:
1.   Be very stingy when applying the NoAlOx or whatever to the aluminum
joints.  A thin layer is sufficient.
2.   First clean the joint (inside and outside tubing) with one piece of
Scotchbrite pad (NOT steel wool) and rub in the NoAlOx with a second piece.
You will keep the oxide material from the first pad out of the cleaned joint
by using separate pads.

73 de
Gene Smar  AD3F

----- Original Message ----- 
From: "Steve Katz" <stevek@jmr.com>
To: "'R March'" <n7ua@ix.netcom.com>; <towertalk@contesting.com>
Sent: Monday, August 02, 2004 12:53 PM
Subject: RE: [BULK] - [TowerTalk] Penetrox


> I use NoAlOx (off the shelf, Home Depot and most electrical supply houses)
> and it seems to last a very long time....used it at all element overlaps
and
> attachments in a KT34XA installed in 1988 and when we just took it down to
> replace it in 2004, the elements slipped out easily and the compound was
> still greasy.  -WB2WIK/6
>
> "There is no reason anyone would want a computer in their home." - Ken
> Olson, Chairman & Founder, Digital Equipment Corporation (1977)
>
> > -----Original Message-----
> > From: R March [SMTP:n7ua@ix.netcom.com]
> > Sent: Monday, August 02, 2004 10:13 AM
> > To: towertalk@contesting.com
> > Subject: [BULK] - [TowerTalk] Penetrox
> >
> > I'm rebuilding some of my old antennas and I have a question.  What is
the
> > best media to use at the bean element AL telescoping joints to (a)
assure
> > they will later be able to be seperated and (b) assure long term RF
> > conductivity through the joint.  KLM used to provide a  Penetrox like
> > material that had what appeared to be some copper embedded in it.  I
have
> > heard reports that this caused corrosion and eventually was a disaster
> > (purely anecdotal info).  Will ordinary Penetrox work, the kind used in
AL
> > wiring joints?  Does anyone have an opinion on this?  Thanks,  Bob
N7UA
> > _______________________________________________
> >
> > See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
> > Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
> > any questions and ask for Sherman, W2FLA.
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>