Towertalk
[Top] [All Lists]

Re: [TowerTalk] HDPE - High Density Polypropylene Extruded

To: "Roger Agnew" <k1kq@motorhomesusa.com>,<towertalk@contesting.com>
Subject: Re: [TowerTalk] HDPE - High Density Polypropylene Extruded
From: "Richard M. Gillingham" <rmoodyg@bellsouth.net>
Date: Thu, 22 Jul 2004 16:32:18 -0400
List-post: <mailto:towertalk@contesting.com>
Check ebay.  Lots of stuff there.

http://business.listings.ebay.com/Raw-Materials-Scrap_Polyethylene-HDPE_W0QQsacategoryZ61796QQsocmdZListingItemListQQsosortorderZ2QQsosortpropertyZ3

Gil, W1RG
----- Original Message ----- 
From: "Roger Agnew" <k1kq@motorhomesusa.com>
To: <towertalk@contesting.com>
Sent: Thursday, July 22, 2004 4:12 PM
Subject: [TowerTalk] HDPE - High Density Polypropylene Extruded


Good Day to the Group:

I have been told that there are times when left over lengths of HDPE - High
Density Polypropylene Extruded from fiber optic runs, etc. become available
at cheap prices. If anyone knows of a source or has any, I'm needing
approximately 400' and I'm flexible on the diameter size. Will pick up &
haul to Austin, TX.

Along with that I'm shopping for 1 or 2 runs of coax the same length for HF
frequencies with best loss for the buck.

Roger Agnew
K1KQ - Austin, TX
888-536-5500

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>