Towertalk
[Top] [All Lists]

Re: [TowerTalk] Cutting slots in aluminum tubing ?

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Cutting slots in aluminum tubing ?
From: <kk9a@arrl.net>
Date: Mon, 19 Jul 2004 21:31:50 -0000
List-post: <mailto:towertalk@contesting.com>
I use a hacksaw with two blades installed.

John

----- Original Message -----
From: "Steve London" <n2ic@arrl.net>
To: <towertalk@contesting.com>
Sent: Monday, July 19, 2004 18:50
Subject: [TowerTalk] Cutting slots in aluminum tubing ?


Anyone have any tips for cutting slots in aluminum tubing without having a
full machine shop at your disposal ?

Thanks,
Steve, N2IC


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>