Re: Fw: [TowerTalk] Prop Pitch Motors

[Sid Ashen-Brenner <sashen@swbell.net>]

        An easier way involves a handful of resistors of known values (all 
different) ...  the rest "should" be rather obvious!

                Sid N0OBM

At 21:13 07/13/2004, Mark AA6DX wrote:


> Subject: Re: [TowerTalk] Prop Pitch Motors
>
>
>  FINDING THE WAAARRR ..   well, back in my engineering days (broadcast) ...
>  it would take two to do it, but here's how ... short out 2 waaaars at one
>  end, a VOM at the other finds the 2 shorted... then, narrow it down to
>  knowing ONE .. then, I'm sure anyone on this reflector can figger out the
>  rest ...  If it's a far cry from one end to another, borrow a couple 2m HTs
> ...  Mark  AA6DX
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk