Check out this article on stacking 6M beams:
http://www.uksmg.org/stack.htm
I would also ask M2 for the spec on stacking this antenna. Their website
says 25' max, they also talk about a 4 bay stack of JHV's for EME so I'm
sure they have numbers for you.
I'm putting up a stack of 5 elemement Directive Systems this week and will
be using the Array Solutions StackMatch II for 6M so that I can select Top,
Bottom or Both. There is a 4th option to put a phasing line in to add a Out
of Phase selection. But for the standard config no phasing lines are needed,
just equal lengths. (http://www.arraysolutions.com/Products/stackmatch.htm)
Gary Mitchelson
N3JPU Montgomery Co. MD FM19
http://www.mitchelson.org/
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Rich Hallman - N7TR
Sent: Monday, July 12, 2004 00:52
To: towertalk@contesting.com
Subject: [TowerTalk] Stacking Distance for M2'd 6m7JHV?
What would be a starting point for stacking 2 6M7JHV 6 meter yagi's?
Thanks...Rich
__________________________
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|