I have been trying to make some measurements on my tower using a Autek VA1
impedance bridge. However, I found that I could get readings that made
sense. There seemed to be something over loading the bridge. I put 500 ohms
to ground and used a scope to make measurements across it. I found that I
have about 8 v peak-peak @ 650 khz from a local broadcast station.
What I can do to remove this interference so I can measure the impedance on
160/80m with the VA1?
tnx
Sylvan Katz - VE5ZX
Saskatoon, SK
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|