Re: [TowerTalk] 6 m beam info needed

[Dino Darling <k6rix@earthlink.net>]

Its a start...

http://www.hy-gain.com/man/pdf/VB-66DX.pdf

At 05:39 PM 07/08/2004 -0700, you wrote:
> I have recently obtained a  6 el 6m yagi and would like to find 
> information on it. It may be a Hy Gain unit. The boom is 24 1/2 feet long 
> and 2 inches OD.. The boom to mast bracket is stamped out of sheet 
> aluminum and would fit a mast of 1 5/8  diameter. The element to boom 
> brackets are also stamped sheet aluminum clamshell type. The DE is split 
> and insulated, with the tubing slipping into plastic inserts in the 
> stamped bracket. It uses a T match with a 1/2 wave re entrant xfmr. The 
> element spacings starting at the reflector are 47, 39 3/4, 63, 62 1/2, and 
> 71 inches.
>   I would very much like to identify the beam and , hopefully , obtain 
> the suggested element settings. 73, Dan, N5AR

Dino...k6rix@earthlink.net  


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk