Re: [TowerTalk] What Welder Makes Good Exothermic Bonds?

[Alan AB2OS <ab2os@att.net>]

So how well would brazing with a Bernzomatic or similar Propane or MAPP 
torch work for bonding copper ground wires to copper-clad steel ground rods?

Alan AB2OS
(who did manage to produce some serviceable bronze welds wth an 
oxy-acetylene torch a few decades ago but never mastered the art of 
fusion welding)

On 07/03/04 08:41 am R. Kevin Stover put fingers to keyboard and 
launched the following message into cyberspace:

<snip>

> I suppose someone makes some wire to use in a MIG welder to weld copper 
> but I'd be surprised if there was. Copper and brass are usually brazed 
> or soldered. Not welded.
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk