TT's:
I need a good design of a cubical antenna , i want to have in this antenna at
least 4 ele in 20m and 17 , and 5 elements in 15 and 12 if fit 6 ele in
10m .
i have the material from 2 cubex antennas a 4 and 3 ele sum of 7 ele
material. i can use and my tower support a 30 ft or - boom .
i will remplace my homebrew 10m 4 ele, 15m 6 ele and 20m 4 ele, the
cubical prove to be better in my city where is very noisy. this power company
only take care of the service not in the quality . here is the result, 20 m
yagi s7 noise some directions jumps to s-9 , cubical 2 ele s2- s3 all
directions at most.
i will like a practical design where dimensions are clear and separation
betewn elements, i will have some spare time this summer and i will like to
have ready for the next cq ww contest.
books, designs or even a manual what i need to get will be apreciate, i want
to have the professional touch in this antenna.
p.d the yagis will be for another location after improving
tnx in advance de Hector XE2K
J. Hector Garcia M.
(760) 455 06 40 USA
(686) 5 43 40 37 MX.
Mexicali B.C
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|