Hi
I'm new to the group and look forward to hearing other opinions on tower topics.
I have a Trylon T500 up. It came with angle brackets in the top section for
placing plates under a thrust bearing and rotor in the top and middle of the
top section.
Would it be better to lower the rotor down into the next section below,or is it
ok in that top section?
I would also like an opinion on the antenna height above the thrust bearing.
Will raising it to 3 ft or more above the bearing have any effect on how low i
should nest the rotor? The antenna is going to be a 4 element SteppIR,about 10
sq ft. Would like to have a log peridioc for the higher bands above the
SteppIR,but am not committed to that.
Any ideas would be most appreciated.
Thanks
Rusty
rwb9fiu@earthlink.net
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|