Hi all,
I am currently investigating the possibilities of building a 4 square
covering multiple bands. The idea is to use 4 masts as 1/4 quarter-wave
verticals on 40, with ropes going from there to the central point of the
square. These ropes could serve as a support for wire verticals for each
of the other bands (i.e. 20, 15, 10), which would consequently form 3
additional 4 squares within the 40 meter system.
I believe something like that is mentioned in ON4UN's book, where he
points out that the elements of the bands not in use need to be grounded
at the feedpoint. Has anyone actually tried something like this? How did
the system perform? If there are no real life experiences - can this
system work from a theoretical point of view?
Would be very grateful for any input.
Pse respond directly as I do not subscribe this group.
Tnx in advance -
Vy 73 de Andy, DL3YBM
*------------------------------------------------------------------*
Prof. Dr. Andreas Gissel
Professor for Logistics and
Organizational Management
University of applied sciences Ludwigshafen
*------------------------------------------------------------------*
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|