To: | Michael Tope <W4EF@dellroy.com> |
---|---|
Subject: | Re: [TowerTalk] Motorola Connectors |
From: | Tom Anderson <WW5L@gte.net> |
Date: | Fri, 14 May 2004 17:11:26 -0500 |
List-post: | <mailto:towertalk@contesting.com> |
Michael: I've bought 90 degree Motorola plugs and cables previously at my local Radio Shack. Also if you have a Fry's Electronics superstore near you, they have a rather large preassembled cable and plug section. Tom, WW5L Michael Tope wrote: Sorry this a slightly little off topic (but not nearly as much as ISO9001 compliance). Anyone know where I can get right-angle motorola connectors (e.g. the standard male car radio connector). Specifically I need something that will change a long straight Motorola male plug into a right-angle that makes a nice sharp turn (there isn't much room between the firewall of my Ford pickup and the back of the radio. A short jumper cable with a Motorola female jack on one end and a Motorola right angle male on the other end would do nicely. I recently got an antenna switch (see its sorta appropriate for TowerTalk) that goes between my car radio and the factory antenna , and the switch uses a long straight male plug which won't clear the firewall. _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [BULK] - Re: [TowerTalk] Amidon customer satisfaction, on4kj |
---|---|
Next by Date: | [TowerTalk] GR 1606-A, Jim Brown |
Previous by Thread: | [TowerTalk] Motorola Connectors, Michael Tope |
Next by Thread: | Re: [TowerTalk] Motorola Connectors, Marlon K. Schafer |
Indexes: | [Date] [Thread] [Top] [All Lists] |