[TowerTalk] CDE Ham II

[Steve <steveac@charter.net>]

I bought a CDE Ham II rotor in 1976, used it for about five years and 
removed it from service with the intent of getting my beams back in the 
air in short order. I replaced a few parts in 1981 and lubricated the 
ball bearings. Turns out that "in short order" turned into 23 years :(

It was stored during that time in attics, barns and sheds. Dry but 
subject to ambient outside temperatures (or greater when it was in the 
attic). I hooked it up on the bench and it works. Removed the top 
casting to take a look at the ball bearings. They are shiny and coated 
with the lubricant I put on them 23 years ago, a lubricant that I bought 
from CDE for just that purpose.

After all these years, is that lubricant on the ball bearings still a 
functioning lubricant? Or is it of questionable character and should be 
replaced? If so, with what?

Thanks.

Steve
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk