Towertalk
[Top] [All Lists]

[TowerTalk] Using Belden 9913 on a crankup tower?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Using Belden 9913 on a crankup tower?
From: <coulter@bellsouth.net>
Date: Thu, 22 Apr 2004 13:59:43 -0400
List-post: <mailto:towertalk@contesting.com>
Could somebody tell me if Belden 9913(not 9913 flex)is usable on a crankup 
tower. What I am interested in, is if it is bendable enough when the tower is 
cranked down or will it bow out too much? Should I go to a more flexable cable 
for the run up the tower, or is it workable? This is for a 51 ft. crankup. 
Thanks for your help.

                            Todd
                            N4JRZ

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>