I forgot to mention, I didnt have any trouble getting things apart because they
were greased before assembly or there wasnt significant corrosion. WD40 isnt a
very good penetrant. I'd use Liquid Wrench or something similar.
Ty K3MM
> Is there anyone out there that's real proud of their refurbishing efforts on
> older beams? I've to 2 KT34-XAs and 2 KT34's sitting on the ground, and the
> current wisdom is to use WD40 to get them apart, and no suggestions yet at
> all on how to make it look shiny again. Has anyone succeeded at a renewal
> project?
>
> Rex K1HI
>
> Merrimack, NH 03054
> PHONE 603-860-7651
> HOME 603-889-7650
> FAX 603-882-6612
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather
> Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
> and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|