I am looking for some opinions on possibly cutting one cross brace to
accommodate a rotator.
The problem I have is IF I mount a Big Boy PST71 in this tower (Rohn 65)
the motor protrudes in such a way, that I would have to cut one cross
brace to allow room for the rotator motor mounting. The question is,
would this have any greatly negative aspects. My initial thought was I
really didn't want to do that, but thought I would see what others may
have done in a similar situation.
The tower is a 60 foot self-supporting Rohn 65 and the rotor would be
mounted at the 50 foot joint, where the last section bolts on.
Thanks much for your input.
Rich KJ6RA
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|