Syl: There's an excellent article by Jack, W1WEF, on "Servicing the Yaesu
G-1000SDX
Rotator" on Page 7 of the NCJ of January/February, 2001. I suspect that it may
be helpful
for working on your G-1000DXA. Good luck!
73,
Phil, N6ZZ
> Date: Fri, 2 Jan 2004 07:08:59 -0600
> From: "VE5ZX" <ve5zx@hotmail.com>
> To: <towertalk@contesting.com>
> Subject: [TowerTalk] Yaesu G-1000DXA
> Message-ID: <LAW11-OE26z7dR01gfG00018211@hotmail.com>
> Content-Type: text/plain;
> charset="iso-8859-1"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Message: 7
>
> I have to replace the external pot in my Yaesu G-1000DXA rotator. I have
> never opened this rotator up - is there anything that I should be cautious
> of when I make the replacement?
>
> tnx and happy new year
>
> Syl - VE5ZX
> Saskatoon, SK
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|