Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotating Antenna Guy Rings

To: TowerTalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rotating Antenna Guy Rings
From: Zoran Brlecic <WA7AA@comcast.net>
Date: Fri, 21 Nov 2003 22:36:54 -0800
List-post: <mailto:towertalk@contesting.com>
Scott Fitzgerald wrote:

>I am looking for rotating guy rings such as the ones that used to be made by Channel Master. They fit up to a 2" mast, and had an outer (fixed) ring and an inner (rotating) allowing the whole mast to be rotated without moving the guys. I believe they fit beween the aluminum mast sections. I am looking for (2) to fit my 37" military 1.785"OD mast.
>
>


You could always use regular thrust bearings mounted upside down on an
aluminum plate.

73 ... WA7AA



_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>