How about cutting off a length of copper ground rod and use clamps on both
ends? all available at HD
Chuck W5PR
----- Original Message -----
From: "Gene Bigham" <jbigham2@kc.rr.com>
To: <TowerTalk@contesting.com>
Sent: Tuesday, November 11, 2003 12:39 PM
Subject: [TowerTalk] Ground through wall
I went the Radio Works route of station ground, and have a heavy cable to
the wall behind my tuner with a large copper lug on it to a stainless bolt
running through the plate to the outside, where in similar fashion there is
another lug on a heavy cable to a ground rod located just outside. My
question is, I would like to replace the stainless bolt/washer/lock washer
arrangement with something brass or copper but cannot find at Home Depot or
hardware here. Is there such a thing, this is a quarter inch or so sized
bolt that is 5 1/2 inches to 6 inches long.
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|