I have had pretty good luck by attaching ground radials
to my SPG panel where all the feedlines come in. This
seems to give the common-mode RF current coming
back down the feedline somwhere to go besides back
into my equipment. I have also used a common mode
choke between the SPG panel and the tuner, but it
wasn't as effective as the ground radials. YMMV
Mike, W4EF.........................
----- Original Message -----
From: "Rob Atkinson, K5UJ" <k5uj@hotmail.com>
To: <towertalk@contesting.com>
Cc: <k5uj@hotmail.com>
Sent: Friday, November 07, 2003 10:45 AM
Subject: [TowerTalk] P.S.: Surge supression
> It seems to me that it will nevertheless still add an unwanted rf ground
> loop. It sounds like it might not be a problem provided you have common
> mode chokes in the feedlines between exciter and amp, and amp and
transmatch
> (or if no transmatch, amp and feed to antenna), i.e. each item in the rf
> chain has a choke in the feedline between it and whatever's next.
>
> Rob Atkinson
> K5UJ
>
> <<<This connection to the AC safety is there anyway unless you
> are using cheater plugs on all your AC cords. The chassis'
> of all your rigs and amps are connected to the third wire
> ground of your AC service. Those chassis' are in turn
> connected to your single point RF ground via the coax
> cables going through the SPG panel. Running an extra
> wire from the AC service ground to the RF SPG probably
> won't change much since you will just be putting a wire
> in parallel with multiple connections that are already there.
> The only way to get around this is to bring the AC service
> into the shack through the SPG.
>
> 73 de Mike, W4EF..................>>>
>
>
> ><<<The [surge supressor] in the station should be grounded to the single
> >point station ground
> >panel, as well as to the home safety ground.>>>
> >
> ><<This sounds like a great way to turn your house wiring dc safety ground
> >into a giant antenna by transferring rf from the shack rf ground to the
> 3rd
> >wire on the house service lines.>>
> >
> >p.s. It also sounds like a way to set up a nice ground loop in your
> station
> >so RF can get into places you don't want it.
> >
> >Rob Atkinson
> >K5UJ
>
> _________________________________________________________________
> Frustrated with dial-up? Get high-speed for as low as $26.95.
> https://broadband.msn.com (Prices may vary by service area.)
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|