> I wonder if it is more due to the difference in size of wire used in
> them (ohmic loses), or sort of linear loading that is arranged in the
> way that contributes to radiation.
> Yuri
With linear loading, if you use thick wire (or tubing)
you reduce the inductance. This forces you to stick
with thin wire.
In a lumped inductor, you can easily use thick wire
or tubing to reduce losses. Also, the total length
of wire to build the coil will typically be considerably
less than the total length of wire in a linear loading
line.
What linear loading really is is realizing an inductance
by using a shorted stub of open wire line. Open wire
line of the type typically used in linear loading doesn't
result in a high unloaded Q inductor. Also, the inductance
is frequency sensitive, reducing the bandwidth.
Rick N6RK
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|