Towertalk
[Top] [All Lists]

RE: [TowerTalk] Recommended FRS radios for tower work

To: "reflector -tower" <towertalk@contesting.com>
Subject: RE: [TowerTalk] Recommended FRS radios for tower work
From: "David Robbins K1TTT" <k1ttt@arrl.net>
Date: Mon, 6 Oct 2003 13:48:43 -0000
List-post: <mailto:towertalk@contesting.com>
Yes, I use an old set of radio shack 49mhz wireless headsets with vox...
their range isn't too good, but they are handy.  Do any of the frs ones
have vox??


David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Mike Gilmer - N2MG
> Sent: Monday, October 06, 2003 13:23
> To: towertalk@contesting.com
> Subject: [TowerTalk] Recommended FRS radios for tower work
> 
> Anyone using VOX headsets while on the tower?  I found
> fumbling for the radio in the tool bucket (or on the
> belt) a bit annoying and useless when the aerial tower
> worker needs both hands for an operation.
> 
> Mike N2MG
> 
> ________________________________________________
> PeoplePC:  It's for people. And it's just smart.
> http://www.peoplepc.com
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers",
"Wireless
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041
with
> any questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>