For chimney straps, probably "nobody," or certainly nobody I've ever found.
I'd find chimney straps having large brackets with enough metal area to
re-drill for 2" U-bolts, to accommodate a 2" mast, if that's what you have.
Remember chimneys were designed to exhaust smoke and not support
antennas...be careful. -WB2WIK/6
"Success is the ability to go from failure to failure with no loss of
enthusiasm." -Winston Churchill
> -----Original Message-----
> From: Jim Spears [SMTP:n1nk@cox.net]
> Sent: Thursday, May 22, 2003 10:45 AM
> To: towertalk@contesting.com
> Subject: [TowerTalk] need source of chimney mount hardware
>
> I want to put a 6 and 2 meter yagi on my chimney. right now I have the
> radio shack hardware which will work just fine with 1.25 mast. This is
> too
> light, who makes hardware that will take, say, 2.0 inch mast?
>
> Jim
> N1NK
> x CY0/N1NK (2002)
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
|