...check with your equipment rental people on a motorized wheel barrow -
made for this kind of job - a small engine drives the wheel and you have
a lot less muscle required to move a batch from your driveway to the hole.
73,
Jim, K4OJ
10 Days until the Florida QSO Party... http://www.floridaqsoparty.org
Roger Hackler wrote:
> Hey gang,
>
> So, here's the meat of the question. I am in the process of putting up a 50
> foot Universal Aluminum Tower (50-9). I have the hole dug and it is
> slightly larger than the dimensions specified by universal. Universal
> specifies 4x4x4 and I'm closer to 4x4x4.5. My calculations come up to just
> over 2.5 yards of concrete.
>
> The problem is that there is no easy way to get to the hole. My front yard
> is very steep, so bringing a full size truck to the back is not an option.
> I haven't checked, but I imagine that pumping is prohibitively expensive. I
> don't relish the idea of carting 200 bags of sacrete to the back and mixing
> it.
>
> Anyone have any ideas? This is the first tower I have erected in the US,
> ant when I did the last one in HL I had the help of your tax dollars (thanks
> guys!).
>
> As a side note, I'm concerned with the specs (or lack thereof) that
> universal provided. The base has no rebar in it. With a block of that
> size, I think Rebar is probably a requirement. Your thoughts?
>
> 73 de KN6RO
>
> Roger Hackler
> Senior Systems Engineer
> Siemens Energy & Automation
> Atlanta, GA
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|