[TowerTalk] mid-point loaded beam elements

[K3BU@aol.com (K3BU@aol.com)]

In a message dated 4/7/03 1:28:33 PM Eastern Daylight Time, 
n4zr@contesting.com writes:

> I'm wondering if it would be feasible to enclose such coils in a plastic 
>  enclosure.  The material would have to be reasonably UV-resistant, strong, 
>  somewhat flexible, and fairly easy to fabricate. 

Use plastic soft drink bottles, cut the bottoms off, use two pieces if you 
want complete enclosure. 

Yuri, K3BU