>
>1) I'll be using an Aluminun Plate - how thick?? It'll go thru the wall to
>the unheated garage. Shack above and heated. It'll hold maybe 32 UHF type
>feedthroughs
What are you bolting it to? If you're bolting it to something that has some
stiffness (i.e. angle or channel iron/alum), then it can be pretty
thin. .062 (1/16") might be fine... 1/8" is pretty stiff.
>2) How far apart can i put the UHF type feedthroughs? I've got from RG-213
>to 7/8" hardline, and might even be using some 1 5/8" hardline if the
>(surplus) price is right later.
make them far enough apart that you can get your fingers/hand around the
connector to unscrew them! I once put BNCs on 3/4" centers.. they fit, but
big mistake.
>3) should I just mount it vertically?? My contracter and friend thinks
>maybe at an angle sloping towards the ground. (this is part of through the
>shack out of the house project of my XYLs, so there is all kinds of
>ongoing construction)
I'd think an angle sloping out at the top, or vertical, so that water
doesn't want to sit on the surface and leak through.
>4) And should I just weather seal the otherside connectors? Considering
>building some type of sheet metal weatherproof cover, or is that total
>overkill??
Consider getting a cheap electrical panel box (which has a "weatherproof"
folding lid) and cutting out the back to bolt the feedthrough panel into.
You can cut the bottom out to give a place for the cables to go. Pick the
right size panel and it will neatly fit inbetween the studs. There are
purpose made things like this which are designed to hold a wood panel about
2" back from the front surface, with a door, etc. (used for the phone line
entrance.. they mount the customer demarcation jack on the wood).
The standard electrical breaker panel (sans breakers) is very cheap at
places like Home Depot (due to huge quantities being made/sold). Just rip
out the back with a power saw, leaving a suitable lip to bolt your aluminum
panel to.
They also make these things with a nice trim fascia on one side that can
cover up the somewhat rough edges you cut in the side of your house.
>thanks and 73
>Ted
>KT1V ex KR1G
>
>
>
>
>
>_________________________________________________________________
>The new MSN 8: smart spam protection and 2 months FREE*
>http://join.msn.com/?page=features/junkmail
>
>_______________________________________________
>
>See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
>Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
|